01
Engine maintenance and repair
We start with oil and filter change, belt-tensioner control, detection of fluid leaks and reading engine fault records. The repair needed is planned based on the vehicle's needs — not a ready-made parts list.
Who comes: Those who complain about oil burning, loss of power, abnormal noise, overheating and warning light.
Engine service page →
Warning lamp →
02
Engine rebuild (overhaul)
The entire process from disassembly to restarting the engine: parts measurement, cleaning, identification of wear parts, supply of original or replacement parts and reassembly at factory torque values.
Note: Our engine work is 5,000 km guaranteed.
Engine rebuild page →
Running-in list →
03
Cylinder Head Machining
Cylinder head and block surface treatments, valve and guide renewal, piston-ring and bearing works. Rectified; It is an economical way to return the engine to mint condition instead of replacing it completely. these works in our own cylinder-head workshop, we do it with our processing experts.
Result: Compression values are brought back to the factory range, oil burning and power loss are eliminated.
Cylinder head machining page →
Compression and fat burning →
04
Transmission and DSG
We perform mechatronics, clutch and oil-filter maintenance in case of vibration during take-off, shaking during gear shifts, failure to skip gears and "emergency program" warnings. The part is not replaced until the fault is verified by adaptation and measurement.
Early symptoms in DSG: shudder and delayed clutch at low speed.
DSG transmission page →
Oil care →
Mechatronics and clutch → Mechatronics or clutch? →
05
Electrical and Electronics
Battery and charging system, starter, alternator, sensor and actuator tests, wiring and comfort electronics works. We track live data in case of intermittent (sometimes disappearing) electrical faults.
Complaints: failure to start, battery dead, warning lights, window-lock-air conditioning electronics.
Battery recording and Start-Stop →
Sensor guide →
Coil failure →
06
Brake and Suspension
Pad and disc replacement, caliper maintenance, brake fluid, shock absorber, control arm, ball joint and tie rod end works. When it comes to noise, shaking and pulling complaints, we first find the source; Unnecessary parts replacement is not recommended.
Security note: Metallic sound and pedal vibration should not be kept waiting when the brake is applied.
Brake and suspension page → Brake noise guide →
Pad-disk →
Tak-tuk sounds →
07
Periodic Maintenance
Maintenance according to mileage and time: engine oil, air-fuel-pollen filters, brake and suspension check, fluid levels, belt condition and battery test. Transactions are recorded; The vehicle's maintenance history remains transparent.
Range: according to the manufacturer's maintenance schedule (usually 15,000 km / 1 year).
Periodic maintenance page → Maintenance guide →
Filter ranges →
08
Digital diagnostics
Fault record reading, live data tracking, compression and leak tests with authorized service level devices. Diagnosis is our main job, especially for malfunctions that cannot be resolved in other services.
Difference: The diagnostic fee is deducted from the total amount when the repair is made.
Diagnostics page → What is VCDS/OBDeleven? →
Engine warning light →
09
Spare parts
Original and original mechanical part; Over the counter sales and shipping all over Türkiye. Confirmation of compatibility is made with your chassis number (VIN); This prevents you from buying the wrong part.
Go to parts catalog →